Minrah Posted February 25, 2017 at 07:15 AM Report Share Posted February 25, 2017 at 07:15 AM not sure if anyone else is having this issue but my IVC chat will no longer work while i load BMS and connect to the server. the IVC client doesnt start up when i connect to the server =/ I do have the correct IP address and the options selected. Has anyone else had this problem? Link to comment Share on other sites More sharing options...
Brain Posted March 2, 2017 at 01:19 PM Report Share Posted March 2, 2017 at 01:19 PM Hi Minrah! Long time no see o/ Both IVC checkboxes in BMS are ticked and you entered the server IP into the IVC dedicated field? It might be necessary to start BMS as admin, so it has the permission to launch and communicate with the IVC client exe. In my case I had to run the client as admin first, then launch BMS as admin (32bit exe, not the launcher). Thx Windows. On the plus side, this get's rid of BMS 'tabbing out' when it starts IVC. Sometimes BMS refuses to tab back in. That's about everything there is to the IVC client. Hope it helps. I've been getting empty error messages upon connecting to IVC. The window doesn't respond, but comms work fine through BMS. I'm not complaining. 1 Link to comment Share on other sites More sharing options...
Minrah Posted March 3, 2017 at 02:22 PM Author Report Share Posted March 3, 2017 at 02:22 PM in my IVC folder i only see the icon for the client and the .exe for the server, not sure where to go to "run" the IVC client side of the chat for admin I got Drive:\Falcon BMS 4.33 U1\Bin\x86\IVC for the location of the IVC but cant find that client side to run Link to comment Share on other sites More sharing options...
Brain Posted March 3, 2017 at 02:38 PM Report Share Posted March 3, 2017 at 02:38 PM Well, seems like some anti virus software found IVC to be suspicioushttps://www.dropbox.com/s/lpovzzrut8nm9ob/IVC.7z?dl=0 Just replace your IVC folder with this one. 1 Link to comment Share on other sites More sharing options...
=VG= SemlerPDX Posted March 3, 2017 at 05:01 PM Report Share Posted March 3, 2017 at 05:01 PM On 3/2/2017 at 5:19 AM, Brain said: Sometimes BMS refuses to tab back in. Quick fix for that (first alt+tab back to BMS, windows task bar will likely still be on top of it) then press Ctrl + Alt + Delete to bring up that blue windows splash screen, don't select anything, just press Esc Will pop back to BMS properly. Link to comment Share on other sites More sharing options...
Recommended Posts