flex Posted February 11, 2026 at 06:55 PM Report Share Posted February 11, 2026 at 06:55 PM Profile: AVCS4 BMS - Immersive Voice Control Radios Issue: (UNKNOWN / OTHER - See user comments in report) Profile Version: 2.20.0.2308 VoiceAttack Version: 1.16 Steps to reproduce: Expected Behavior:profile worked as expected for quite some time. i now wanted to use first time the command "flight go wedge". for info "element go wedge" and "wingman go wedge" do work as expected; other commands like "report airborne" work as well correctly Observed Behavior:but saying "flight go wedge" this then happened: - Command was recognized as a derived command, -profile unload "init_Main", - profile changed to Ready or Not, exciting AVCS BMS to non AVCS CORE Profile (i do have an own Ready or Not profile - NOT your version), -stopped command "flight go wedge" see attached screenshot Personal Testing:this can be reproduced. I imported again the BMS profile, renamed it and did all the steps in the VA command window but same result. restart PC did not change anything. Comments: Thx for looking into this. best flex Severity / Status: Non-issue View full bug report Quote Link to comment Share on other sites More sharing options...
=VG= SemlerPDX Posted February 11, 2026 at 08:41 PM Report Share Posted February 11, 2026 at 08:41 PM You have VoiceAttack as the application in focus, with the target for text interaction as the profiles list. When you issue this command which presses the "R" key (for Flight), what is happening is the profiles list is recognizing your "R" keypress to jump to and load the first profile that starts with the letter "R". If you instead open a Notepad and place the cursor there, and issue the command, "Flight Go Wedge", you would instead see the letter(s) "R" typed out followed by the number "1" as pictured below: The solution would be to test this while you are actually flying in Falcon BMS and when BMS is the active window, so that virtual keypress macros send keys to this application and NOT to the VoiceAttack application. If you have any other issues, please feel free to let me know! Quote Link to comment Share on other sites More sharing options...
=VG= SemlerPDX Posted February 11, 2026 at 08:44 PM Report Share Posted February 11, 2026 at 08:44 PM Changed Severity / Status to Non-issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.